How To Use; Technical Data - HAEGER Origin Plus CH-50C.004A Mode D'emploi

How to use

Before using the appliance for the first time, clean it thoroughly.
•
Place the motor unit on the table.
•
Put the chopping bowl on the motor unit.
•
Fit the chopping blade on to the blade holder inside the bowl by pressing down
on the blade body until you hear it click in place.
The blade cutter is extremely sharp, handle it with care
•
Cut the ingredients up into pieces and place them in the bowl.
Never place any liquid or juicy food in the bowl
•
Fit chopping switch lid onto bowl
•
Only then plug the multi-food chopper to power socket.
•
Press on the chopping switch lid to start the chopper.
•
To stop the chopper, let go of the lid.
Always wait until the blade has totally stopped before removing the lid
•
Unplug the chopper after each use.
•
To remove the blade; first take the bowl in both hands, press the top button with
your index finger, then lift off the bowl and the chopping blade together.
To operate the mixing goblet
•
Place the motor unit on the table.
•
Put the ingredients in mixing goblet. (do not forget to pour the liquid into mixing
goblet at first)
•
Put the mixing goblet on motor unit. Ensure the mixing goblet placed steady and
smooth on the motor unit by turn it around slowly.
•
Plug the processor on. Push down on the mixing switch base of goblet to operate
the processor.
•
To stop the processor, just release the mixing switch base.
Cleaning
• You can put the chopping bowl, the blade, the lid and the spatula in a dish-
washer.
Don't put the motor unit under a tap water but clean it with a damp cloth.
•

Technical Data

Model:
Power supply:
Power consumption:
Protection class:
Chopper capacity:
Instructions for use
.
CH-50C.004A
230V~, 50 Hz
500W
II
200g
English
3