Using The Radio; Using The Cd Player - Insignia NS-C5112 Mode D'emploi

Insignia NS-C5112 CD Car Deck with HD Radio Receiver
Resetting your car deck
You need to reset your car deck when:
• You first install it.
• You replace the vehicle's battery.
• You see errors on the LCD.
Note
When you reset your car deck, the clock setting
and other memorized functions are erased.
To reset your car deck:
• Open the front panel, then press RESET.

Using the radio

Selecting the radio band
To select the radio band:
1 Make sure that you are in radio mode.
2 Press BND one or more times to select the
radio band. You can select F1, F2, F3, A1, or
A2. F1 through F3 are FM bands. A1 and A2
are AM bands
Automatically tuning a radio station
To automatically tune a radio station:
1 Make sure that you are in radio mode.
2 Briefly press
or or on your car deck. AUTO
appears on the LCD, and your car deck
scans for the next station with a signal.
Manually tuning a radio station
To manually tune a radio station:
1 Make sure that you are in radio mode.
2 Press and hold
control or or
MANUAL appears on the LCD.
3 Briefly press and release
remote control or
one or more times to tune to the station you
want.
Automatically scanning for stations
Note
You can only scan for stations with the remote
control.
To automatically scan for stations:
1 Press SCAN. Your car deck scans for a
station with a signal, then plays five seconds
of the station before it goes to the next
station.
2 When you hear the station you want to play,
press SCAN again.
Storing stations
You can store as many as six stations per radio
band.
To memorize stations:
1 Make sure that you are in radio mode.
2 Select the radio band that has the station you
want to store.
or on the remote control
or on the remote
on your car deck.
or on the
or on your car deck
www.insignia-products.com
3 Tune to the station you want to store.
4 Press AMS on the remote control or a preset
number button (1 through 6) on your car deck
for more than three seconds. The station is
stored in memory.
Scanning stored stations
You can scan stored stations. Your car deck
plays five seconds of each stored station before
going to the next stored station.
Note
You can only scan for stored stations with the
remote control.
To scan stored stations:
1 Make sure that you are in radio mode.
2 Select the radio band that has the stored
stations you want to scan.
3 Press AMS on the remote control to start the
scan. You car deck plays five seconds of
each stored station before going to the next
stored station.
4 When you hear the station you want to play,
press AMS again.
Turning digital (HD) stations on or off
To turn digital (HD) stations on or off:
1 Make sure that you are in radio mode.
2 Press and hold HD until the LCD displays
HD-S ON or HD-S OFF.
When HD-S ON is displayed on the LCD,
tuning and scanning for stations occurs on
the digital band.

Using the CD player

Playable discs
Your car deck can play the following discs:
Disc
Label
type
CD
MP3
MP3
Playing a CD
To play a CD:
1 Make sure that you are in CD playback
mode.
2 Press REL on your car deck to open the front
panel.
3 Insert a CD with the label side up onto the
CD slot. The CD starts playing automatically.
Format Size
Audio 12 cm
Audio 12 cm
7