Installation And Connection - Tetra Tetronic LED Connect Complete Set 580 Mode D'emploi

UK
Intended use
Only use the Tetronic LED Connect 580/780/980
• as lighting for an aquarium or terrarium,
• in indoor areas,
• for private use,
• in line with the technical data.
Overview
Items included in the set
1
LED luminaire
2 Extension arm: allows the length of the luminaire to be
continuously adjusted to fit various attachment spans.
3 Cover plate: for covering the luminaire's ends if extension arms
are not used.
4 Control box: for connecting up to two LED luminaires and
controlling them via the Tetra app.
5
Power supply
6 Mains cable
7 Multi-adapter: for fitting the luminaire to the edge of the
aquarium or screwing the luminaire onto the aquarium lid.
8 T5 adapter: for installing the luminaire in T5 fluorescent tube
brackets (fluorescent tube diameter 16 mm).
9 T8 adapter: for installing the luminaire in T8 fluorescent tube
brackets (fluorescent tube diameter 26 mm).
The following accessories are available from retailers:
→
Accessories
Tetronic LED Connect Single Light 580/780/980: extension luminaire
Tetronic arms: mounting arms providing an alternative means of
attaching the LED luminaire.

INSTALLATION AND CONNECTION

NOTE
To ensure that the fixture is secure, each extension arm
should extend no further than 12.5 cm from the end of the LED
luminaire.
10
→
Fig. A
Fig. A
Tetronic LED Connect Complete Set