Replacing The Fuse; Specifications - Sharp IG-BC2U Manuel D'utilisation

REPLACING THE FUSE

HOW TO REPLACE
Turn the tip of the cigar plug and remove it.
1
Insert the new fuse, then
2
reassemble as before.
• Be sure to replace with a 5A glass tube
fuse (commercially available).

SPECIFICATIONS

Model
Rated voltage
Applicable interior volume
Operation mode
*2
Ion density
Power consumption
Outer dimensions
Weight
*1 Space corresponding to a cabin measuring 1.5 (width) x 2.4 (depth) x 1.0 (height) meters
*2 Approximate number of ions as measured from a point near the center of a
space of the applicable volume (0.5 meters from the fl oor) when operated in the
respective operating modes.
* Some specifi cations may be changed for improvement purposes.
ACCESSORIES
*1
HIGH
Approx. 25,000 ions/cm
2.3W
Cylindrical, 80 mm upper section diameter / 65 mm lower section
diameter x 150 mm height (Not including car adapter)
Approx. 340g (Not including car adapter)
Car Adapter / Operation manual / User Card
5A glass
tube fuse
New fuse
IG-BC2U
DC12V
Approx. 3.6 m
3
E-15
3
LOW
Approx. 7,000 ions/cm
1.3W
3