Installation Requirements; Location Requirements; Electrical Requirements - Gladiator COMPACTOR W11034802A Instructions D'utilisation

Location Requirements

Product Dimensions
34 / "
1
8
(86.7 cm)
15"
(38.1 cm)
Product Dimensions with Casters
NOTE: Positioning compactor on caster frame will increase
height to 38" (96.5 cm).
38"
(96.5 cm)
(38.1 cm)
Cutout Dimensions
3" min.
(7.6 cm)
A
24" min.
(61.0 cm)
15
(38.7 cm)

INSTALLATION REQUIREMENTS

24"
(61.0 cm)
24"
15"
(61 cm)
34 / " min.
1
4
(87.0 cm)
18" min.
(45.7 cm)
1 / " min.
4
A. Grounded electrical outlet must be a minimum of 3" (7.6 cm) away
from surrounding cabinets or nearby walls as shown. It can be placed
either to the left or the right side of the compactor.
Clearance Dimensions
B
A. Leave 6" (15.2 cm) of clearance space to the right side of the
compactor in order to remove the compactor bags.
B. Leave 23" (58.4 cm) of clearance in front of the compactor in order
to fully open or remove the compactor drawer.

Electrical Requirements

Recommended Grounding Method
This compactor is for use on a single phase,
115 volt, 60 Hz, AC only, 15 or 20 amp fused
and properly grounded circuit, and is equipped
with a grounding plug as shown below. It is
recommended that a separate circuit serving
only this appliance be provided.
This compactor must be grounded while in
use to reduce the risk of electric shock. The
compactor is equipped with a three-conductor
cord and 3 prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire. Do not connect
the green (or green and yellow) wire to a live terminal. Do
not modify the plug attached to the compactor; use with
a grounded receptacle.
A
3