Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Unpacking Utility Cart
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Remove the cabinet, parts, and fasteners.
2. Verify contents. See "Parts Supplied."
Tools and Parts
Gather the required tools and parts before starting assembly.
WARNING
Excessive Weight Hazard
Use two or more people to move or assemble utility
cart.
Failure to do so can result in back or other injury.
Tools Needed
10 mm Wrench
■
12 mm Wrench
■
Slotted or Phillips screwdriver
■
#5 Allen Wrench
■
Install Upright Supports to Tray and Drawer and Side Handle
1.
Attach upright supports to bottom
CC
AA
Attach upright supports (C) to bottom tray (B), using 4 sets of
bolts (AA) and nuts (CC) for each upright support. Lay cart on its
back.
4
ASSEMBLY INSTRUCTIONS
C
Cart Use Requirement
Maximum weight limit is 500 lbs (226.8 kg) for the cabinet.
■
Maximum weight limit is 50 lbs (22.7 kg) for the drawer.
■
Maximum weight limit is 150 lbs (68 kg) for the tray.
■
2.
Attach drawer body
CC
AA
C
Attach drawer body (A) on the other end of upright supports (C)
using 4 sets of bolts (AA) and nuts (CC).
A
Publicité
Table des Matières
