Xo R24S Notice D'utilisation page 14

4. INSTALL THE DUCT COVER:
Arrange the electrical power supply within the dimensions of the decorative flue. If your
appliance is to be installed in the ducting version or in the version with external motor,
prepare the air exhaust opening. Adjust the width of the support bracket of the upper
flue (Fig.7). Then fix it to the ceiling using the screws A (Fig.7) in such a way that it is
in line with your hood and respecting the distance from the ceiling indicated in Fig.6.
Connect the flange C to the air exhaust hole using a connection pipe (Fig.8). Insert the
upper flue into the lower flue. Fix the lower flue to the hood using the screws B provided
(Fig.8), extract the upper flue up to the bracket and fix it with the screws B (Fig.7).
Fig.6
Fig.8
Fig.7
- 14 -