Xo R24S Notice D'utilisation page 13

- Carry out the power supplly connection in accordance with the national electric code,
ANSI/NFPA 70-1999.
5. Insert the wires into the box, then close the box cover, securing it using the screws
that were previously removed.
The appliance must be installed at a
minimum height of 27" from an elec-
tric cooker stove, or 30" from gas or
combined cooker stoves. If a connec-
tion ductwork composed of two parts
is used, the upper part must be placed
outside the lower part. Do not connect
the range hood exhaust duct air to the
same duct air used to exhaust hot air
or fumes from other appliances other
than electrical. Before proceeding with
the assembly operations, remove the
anti-grease filter(s) (Fig.5) so that the
unit is easier to handle.
Fig.5
3. CONNECT THE DUCTWORK:
- 13 -