Tapping Hot Water; Touchscreen Controls - nedis KAWD300FBK Guide De Démarrage Rapide

Tapping hot water

Do not remove A
-
1. Place a glass under the spout A
2. Select the preferred temperature and volume settings.
3. Tap the on / off button A
Hot water flows from A
g
4. Press A
to manually stop the cycle.
Emptying the drip plate
1. Place one hand on A
2. Lift up the drip tray A
3. Remove the drip plate A
5
4. Empty A
.
4
5. Place A back on A
5
6. Place A
back on the product.

Touchscreen controls

Temperature indicator
y
A
Volume indicator A
Water temperature for
i
milk A
Setting the temperature
o
manually A
Touchscreen control lock
p
A
6
while hot water is dispensed.
3
g
.
3
until the set volume has been dispensed.
6
to stabilize the product.
5
with the other hand.
4
.
5
.
Displays the current and the set temperature.
4
When the display shows "000", unheated
water is dispensed.
Displays the current and the set volume.
u
4
When the display shows "000", the water
flows continuously until A
Dispense water at 40 °C. This temperature is
especially suited for powdered milk.
o
Tap A
between 45 and 100 °C and 000.
4
After 10 seconds the LCD display will be
automatically locked.
-
Tap and hold A
the product.
-
Tap A
.
to set the desired temperature
p
for 3 - 5 seconds to unlock
p
once to lock the product.
7
g
is pressed.