Furna 533095 Manuel Du Propriétaire page 6

Cleaning the FURNA Vaporizer
• Eject the oven.
• Open the oven by pressing down on the mouthpiece and turning
counter clockwise.
• Remove any previously used material with the multi-tool.
• Use the multi-tool to push out the silicone nib.
• Remove the nib screen by gently pushing back and edge of the silicone
and picking out the screen.
• Remove the ceramic cooling coil by gently squeezing the top portion
of the nib. Take caution with the coil as it is brittle and may break if
dropped on a hard surface.
• Clean all of the mouth piece with isopropyl alcohol.
• Use a brush to scrub parts if necessary. Some staining may occur,
but it will no effect the function of the product.
• Allow the parts to dry and reassemble.
Isopropyl alcohol is flammable. Follow safety
instructions provided by manufacturer.
Keep away from heat sources and open flame.
Note the orientation
of the ceramic coil.
Nib Ceramic Silicone
Screen Coil Nib
• If additional cleaning of the oven is required after scraping our the material
with the multi-tool, dunk the brush in isopropyl alcohol and scrub out the oven.
• Allow the oven to dry inverted.
• When all components are dry, reassemble.
TIP: Re-seat the nib screen by placing it on the ceramic
coil, and gently moving it in a circular motion until the
silicone encompasses the edge of the nib screen.
Mouthpiece
Do not
submerge
the oven.