Table Des Matières; General Safety Instructions; Special Safety Instructions; Assembly - Fitting The Accessories - stayer CV12 Instructions D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10

1. General Safety Instructions:

See the accompanying manual.

2. Special Safety Instructions

-
Read this manual carefully before using the appliance.
- The intended use is described in this manual.
WARNING. The use of any accessory or the performance
of any operation with this appliance other than those
recommended in this instruction manual may present a risk
of personal injury.
-
Retain this manual for future reference.

3. Assembly - Fitting the accessories

The vacuum cleaner CV12 is supplied with the following
accessories:
A crevice brush for confined spaces
A soft brush for wet spills
To fit an accessory, proceed as follows:
Take the accessories from the appliance
Insert the appropriate accessory into the front of the
appliance

4. Instruction introduce

1. Switch
2. Body
3.Release button
4. Soft brush
5. Crevice brush
6. Dust cup
7. Car insert head
8. Filter

5. Using your appliance

- Do not use the appliance to pick up liquids or any
material that could catch fire.
- Do not immerse the appliance in water.
- To prevent wet spills from entering the motor, do not
a. Turn the appliance upside down or sideways
b. Point the nozzle upwards
c.Shake the appliance excessively
- Empty wet spills immediately
6. Content List
6. Content List
ENGLISH
7

7. Intended use

Your hand held vacuum cleaner has been designed
for light wet and
Dry vacuum cleaning purposes.

8. Cleaning and maintenance

Warning! Regularly clean the filter
8.1. Cleaning the dust cup and filters
The filter 8 are re-usable and should be cleaner
regularly
-
Empty the dust cup 6 as described above.
- Brush any loose dust off the filters.
-
Wash the filters in warm, soapy water. The cup can
also be washed if necessary. Do not immerse the
appliance in water.
-
Make sure the dust cup and filters are dry.
-
Refit the filter -Refit the dust bowl onto the
appliance. Make sure the bowl clicks into place.
Warning! Never use the appliance without the filter.
Optimum dust
Collection will only be achieved with clean filter and
empty dust cup.
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged.
A. Remove the old filter as described above.
B. Fit the new filter as described above.

9. After use

- Always empty and clean the bowl after picking up
liquid. Do not store the appliance with liquid in the
bowl
- When not in use, the appliance should be stored in
a dry place. Children should have access to stored
appliances.

10. Emptying the dust cup

-
Press the release button (A & B) and remove the
dust cup
-
Remove the filter
-
Empty the dust cup
- Refit the filter
-
Refit the dust cup onto the appliance. Make sure the
dust cup clicks into place.
7

Publicité

Table des Matières
loading

Table des Matières