Astralpool Smart 30 Manuel D'installation Et D'entretien page 8

4.3. Electrical connection of the electrolysis cell
Make the interconnection between the electrolysis cell and the power supply according to the following scheme. Due to relatively high current
intensity circulating do not modify or cut either the length or section of the supplied cables without making a previous consultation to an
authorized Astralpool distributor. The cable connecting the electrolysis cell and the power supply should never exceed the maximum length
recommended in this Manual: Smart 30 / 42347, 15 m.; Smart 60 / 42348, 7.5 m.; Smart 100 / 42349, 4.0 m.
4.4 Cover detaching
1. Remove the embellisher (A) situated in the cover.
2. Unscrew the cover fixation screw (B).
3. Remove the cover by sliding it upwards and outwards.
Fig. 9b
6