Astralpool Smart 30 Manuel D'installation Et D'entretien page 10

Smart 30 / 60
Fig. 11
AUTOMATIC COVER control: the system has an input for a potential-free contact [COB]. When the contact connected to this input is

closed (automatic cover closed), the electrolysis system reduces its production to 10% of its rated value.
EXTERNAL Control: the system has an additional auxiliary input for a potential-free contact [ORP]. This input can be used to make

the electrolysis system interact with an external controller (ORP, RESIDUAL CHLORINE, PHOTOMETER, etc.). When the contact
connected to this input is OPEN, the electrolysis system is stopped. To activate this input, place jumper "JP2" located on the unit's
control panel.
8
Smart 100
Fig. 12
.