DeLonghi DCG49 Série Mode D'emploi page 5

KNOW YOUR COFFEE GRINDER (continued)
FEATURES:
1. GRIND SELECTOR: Allows you to choose the perfect grind setting from
coarse (for percolators and coffee urns) to medium (for drip coffee
makers) to extra fine (for espresso makers).
2. BURR GRINDING WHEELS: The burr grinding wheels are located inside
the coffee bean container. They assure a consistent and uniform ground
texture.
3. COFFEE BEAN CONTAINER: This container holds the whole coffee
beans before they are ground.
4. GROUND COFFEE CONTAINER: This container holds the ground coffee
that is produced from grinding the coffee beans, after pushing the grind
button. The ground coffee container also includes tablespoon
measurements indicators.
5. ON-OFF / GRIND BUTTON: By pressing this button, the whole coffee
beans are then ground into the ground coffee container.
6. DUAL SAFE SYSTEM: The grinding wheels stop if the ground coffee
container or bean container lid is removed.
OPERATING YOUR COFFEE GRINDER
1. Place the coffee grinder on a flat, level surface away from any edge.
2. Unwind the required length of cord from the appliance and plug the unit
into a 120V / 60Hz only outlet.
3. Remove the lid from the appliance and pour the coffee beans into the
container.
grinder.
USING THE GRIND SELECTOR
4. To change the desired degree of grinding (coarse, medium or extra fine)
turn the unit around to the back.
5. Use the grind selector to adjust the grind by moving the rotary switch to
the position you want.
6. Position the white dot on the rotary switch with the line corresponding to
the grind above. There are three different grinds:
a) Coarse: For use with percolators and coffee urns
b) Medium: For use with drip coffee makers
c) Extra Fine: For use with espresso makers
Replace the lid and make sure that it fits tightly to the coffee
5