Manuale_TRA69HF
2004.3.3
2:59 PM
Page 18
Fig. 3
Antenna
LED Light
Pull out
or
push in
Unit channel
slide switch
ON Push button (Dim)
OFF Push button
18
2. LED function
LED on Transmitter TRA 69 HF is mainly used as an
indicator. When press ON button, LED turns on and a
signal transmits to the combining Receiver, the
controlled unit of receiver also turns on. When press
OFF button, LED turns on and the controlled unit of
receiver receives OFF signal and turns off.
3. Dimmer function
When the combining receiver has dimmer feature, by
keeping pressing ON pushbutton of TRA 69 HF can
cyclically adjust the illumination level of the connected
light device of receiver from the rate about 5% - 100%.
The illumination value of TRA 69 HF can be stored as
memory that means when user turns light on again, the