Maintenance; Safetyprotectivedevices; Attention; Technical Data - KLARBACH HL 82084 ro Manuel D'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE

This appliance does not require any special maintenance. Disconnect the plug from
the socket and let the appliance cool down well before cleaning it. In order to clean
the appliance, use a soft or slight damp cloth. Never use abrasives or chemical
solvents. Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
Once not in use the cable can be stored on the bottom of the appliance; make sure
that the appliance has cooled down completely before storing it in the box.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.

SAFETYPROTECTIVEDEVICES

1.OVERHEAT PROTECTION SYSTEM
The power to the heater will automatically cut off if the temperature of the heater
exceeds a certain limit. In the event of overheating, the heater will stop operating,
switch the heater off and allow it to completely cool. The heater will then resume
operating as normal.
2. TIP-OVER PROTECTIVE SWITCH
When you use the heater in an upright position on a flat and stable surface, the tip-
over protect switch will be on. In the event the heater is knocked over, the heater
will stop functioning automatically.

ATTENTION:

• Do not override the Tip-over Protective Switch as this may cause a hazard.
• Using the unit on a deep pile carpet may activate the tip-over protective switch.
19

TECHNICAL DATA

See the rating label on the appliance.
Model identifier(s):
Item
Symbol
Value
Unit
Heat output
P
Nominal heat output
1,9
kW
nom
Minimum heat
P
1,0
kW
output (indicative)
min
Maximum continuous
1,9
kW
P
heat output
max,c
Auxiliary electricity consumption
At nominal
el
1,894
kW
max
heat output
At minimum
el
0,955
kW
heat output
min
In standby mode
N/A
kW
el
SB
Contact details
Refer to Applicant Name/Address
ENG
JIB / HL 82084 ro
Item
Unit
Type of heat input, for electric storage local
space heaters only (select one)
Manual heat charge control, with
No
integrated thermostat
Manual heat charge control with room
No
and/or outdoor temperature feedback
Electronic heat charge control with room
No
and/ or outdoor temperature feedback
Fan assisted heat output
No
Type of heat output/room temperature
control (select one)
Single stage heat output and no room
No
temperature control
Two or more manual stages, no room
No
temperature control
With mechanic thermostat room
Yes
temperature control
With electronic room temperature control
No
Electronic room temperature control plus
No
day timer
Electronic room temperature control plus
No
week timer
Other control options (multiple selections possible)
Room temperature control, with
No
presence detection
Room temperature control, with open
No
window detection
No
With distance control option
No
With adaptive start control
With working time limitation
No
No
With black bulb sensor
20

Publicité

Table des Matières
loading

Table des Matières