Publicité
Les langues disponibles
Les langues disponibles
Interior temperature in °C from 0°C to 60°C (or in °F).
-
2 repeater alarms (5 minutes)
-
Runs on 2 x LR6 / AA batteries (not supplied)
-
Installation:
1.
Carefully remove the clock from its packaging. Carefully remove the protective
film.
Battery insertion: open the battery compartment at the back of the clock by
gently pulling the lid.
Install 2 x LR6 batteries in the direction indicated, ensuring the correct polarity:
+/-). Incorrect positioning could damage the article. Close the lid.
2 installation positions:
Wall-mounted
-
Standalone: lift the stand
-
Installation recommendation
comfortable viewing:
When you opt for standalone installation: install the digital clock at
-
eye level or in a higher position, around 10 cm above eye level.
When you hang the clock on a wall: install the clock at a height of
-
10 to 30 cm above eye level.
Whether in a standalone position or wall-mounted, you should not
need to look downwards to view the clock: this is not the best
viewing position.
for good,
Publicité
