ARIETE Ghiro 8810 Mode D'emploi page 13

DRYING
- DO NOT use the electric blanket until it is completely dry.
- In the drying phase hang the electric blanket out trying to approximately reach the same original dimension.
Do not expose it to direct sunlight to prevent it from turning yellow and to avoid colour change in wool or
fabric.
- Do not use pegs on the electric parts.
- Inspect the electric blanket to make sure the wires are not bent or twisted. It is recommended to inspect the
electric blanket wires against the light.
- Send the electric blanket back to our service centre for safety inspection in case of problems with wires after hav-
ing hung the electric blanket out or if the electric blanket does not return to its original shape and dimensions.
WARNING!
In case of disuse of the appliance, store it in its original packaging in a dry and clean
place.
WARNING!
When storing the appliance, leave it to cool before folding it.
WARNING!
DO NOT make folds and/or deform the appliance and be careful not to place on its
top heavy objects that could crush and damage it.
Fabric may turn yellow in the course of time; it is a natural process. Appliance safety and/or perform-
ance are not jeopardized by this phenomenon in any way.
The wool could be non-uniform in colour or the colour could change over a period of time and have fine
graining, typical of natural fibres.
APPLIANCE STORAGE AND CARE
- 11 -
EN