BluMill SL-9831 Mode D'emploi page 5

Item
1
2
Risk of injury from the rotating tools!
While the appliance is operating, keep fi ngers clear of the mixing bowl.
Do not change tools until the appliance is at a standstill and have been unplugged.
When switch off, the drive continues running briefl y.
How to use Kneading hook, Flat beater, Whisk
2021-01-07 OCG BluMill Stand Mixer 1200W manualV02.indd 5 2021-01-07 OCG BluMill Stand Mixer 1200W manualV02.indd 5
Position
Set up Kneading Hook, Flat beater, Wisk, accor-
ding to your desire.
Accessory
Place the appliance on a fl at surface, e.g.
a kitchen counter, and make sure it is stan-
ding fi rmly.
Press the arm release button (2) at the
same time lift the swivel arm (1) with hand
so that it locks into place with a click The
swivel arm tilts up.
EN
5
21-01-2021 16:11 21-01-2021 16:11