Lnb Settings - Reimo Carbest 49883 Manuel D'utilisation

UK

11. LNB SETTINGS

In the LNB settings you can configure various settings for the correct
adjustment of your satellite system.
NOTE
Editing of these settings is recommended for experienced users only.
The settings are pre-configured for a simple satellite system with one
LNB and must be changed only in the rarest of cases.
1. Press the [MENU ] button and go to the menu item »Channel«.
2. Confirm the input by pressing [OK].
3. Navigate to the menu item »Satellite Scan« and confirm with the [OK]
button.
4. Go to »Satellite Scan« and confirm with the [OK] button.
5. Navigate to the column at the far right and select the desired settings.
The following menu items are available:
LNB type:
LNB voltage:
22KHz:
Toneburst:
DiSEqC1.0:
DiSEqC1.1:
Unicable:
IF Freq:
SatPosition:
09750 / 10600, 09750 / 10750, 05150, 05750,
09750, 10600, 10750, 11300, 11475, Manual input
On, 18 V, 13 V, Off
Auto, On, Off
Off, Burst A, Burst B
Off, LNB1, LNB2, LNB3, LNB4
Off, LNB1 – LNB16
Off, On
(Available only if Unicable is set to »On«)
Manual input
(Available only if Unicable is set to »On«) Sat A, Sat B
57
Smart TV | 49883 / 49881