Satellite Settings - Reimo Carbest 49883 Manuel D'utilisation

UK

10. SATELLITE SETTINGS

In this menu you can configure the settings for the automatic satellite search
and various other satellite settings.
1. Press [INPUT] to enter the input sources menu.
2. Use the buttons [ ▲ ▼ ] to navigate in the menu and select the menu
item DVB-S.
3. Press [OK] to confirm the selection and switch to Satellite mode.
4. Use the buttons [ ▲ ▼ ] to select between »Standard channel list« and
»Satellite scan«.
The following configuration options are available in the menus:
Standard channel list
Select the menu item »Standard channel list« if you do
not wish to conduct a search and load the pre-installed
channel list instead.
Satellite scan
Select the menu item »Satellite Scan« to access
the satellite settings. The menu is divided into three
columns (Satellite / Transponder / Sat settings).
At the left you will see a list of all satellites. The centre and right
columns show the corresponding transponder and the LNB setting,
respectively.
Smart TV | 49883 / 49881
53