Operation - Omnitronic UHF-500 Mode D'emploi

6. OPERATION

Display
Select a channel
Press SELECT to select display A or B.
The display indicates OPEN.
Set a channel
Press SET to select channel.
Press UP or DOWN to select a channel between 1 and 16.
Set a frequency
Press SET and select frequency.
Press UP or DOWN to select a frequency.
Via the RF-indicator on the dipsplay you can see if microphone signals are being received.
If no signals are received temporarily, the display indicates Mute.
19/35 00024889.DOC, Version 1.1