Introduction - Omnitronic UHF-500 Mode D'emploi

Wireless Microphone System
For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC UHF-500. If you follow the instructions given in this manual,
we can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC UHF-500.
Please make sure that there are no obvious transport damages. Should you notice any damage, do not take
the device into operation and immediately consult your local dealer.
1.1 Features
Complete 2 channel UHF microphone system
• Stationary receiver
• With two rubber antennas
• Operation in the low-interference UHF-band
• With two blue displays for power supply, signal input and frequency
• With output level control
• With external transformer
• Latest transmission technology in a rugged metal housing
• Set includes 2 wireless microphones in a practical transport suitcase
• For 2 x 1.5 V Mignon batteries (type AA) each Mic
• Operation range 50 meters
• Delivery includes 2 colour caps for the individual mics on stage
• Delivery includes 1 meter jack-jack cable for connecting the receiver to the audio mixer
• Not compatible with 115/215/315/415-series
OPERATING INSTRUCTIONS
UHF-500
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before you initial start-up.
CAUTION!
12/35 00024889.DOC, Version 1.1