Safety Instructions; Electrical Safety - KINZO 10M950 Mode D'emploi

SAFETY INSTRUCTIONS

When using the machine, always observe
the enclosed safety instructions as well as
the additional safety instructions.
The following symbols are used throughout
this manual:
Denotes risk of personal injury
or damage to the tool.
You will find the following symbols on the
machine:
Take measures to protect your
eyes.
Consult the manual.
ADDITIONAL SAFETY INSTRUCTIONS FOR
STEAM WALLPAPER STRIPPERS
Steam wallpaper strippers must not be
I
used by children or untrained persons.
Do not use the appliance in the presence
I
of children and/or animals.
Do not point the appliance towards
I
people, animals or electrical appliances.
Always check the working surface to see
I
if it is suitable for the appliance.
Always unplug the appliance before filling
I
it with water.
Only use clean water when filling the
I
appliance.
Do not use detergents, acids or flammable
I
liquids in the appliance.
Do not submerge the appliance in water
I
or other liquids.
Do not use the appliance without the filler
I
cap.
Avoid touching hot parts of the appliance.
I
Let the appliance cool down after use.
I
10M950

ELECTRICAL SAFETY

Always check that the power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION (fig. A)
Your steam wallpaper stripper has been
designed for removing wallpaper.
1 Water tank
2 Filler cap
3 Hose
4 Steam plate
Mounting the hose (fig. B)
Fit one end of the hose (3) on the
I
connection (7) of the water tank (1).
Securely tighten the coupling nut.
I
Mounting the steam plate (fig. C)
Fit the steam plate (4) with the connection
I
(8) on the other end of the hose (3).
Securely tighten the coupling nut.
I
Filling the water tank (fig. A)
Remove the filler cap (2).
I
Fill the water tank (1) with water.
I
Replace the filler cap.
I
Instructions for use
Make sure that the steam leaves the
I
steam plate steadily and without pressure
to correctly penetrate the wallpaper.
Slowly move the steam plate with circular
I
movements over the wallpaper.
When removing thick wallpaper, it is
I
necessary to let the steam absorb into the
wallpaper for approx. 15 minutes before
removing the wallpaper.
When removing coated or washable
I
wallpaper, first make a cut in the wallpaper
to let the steam under the top layer.
Never hold the steam outlet at the same
I
point for a long period.
17