Connection To Power Supply; Mounting The Fan - KLASS Fan Riaica DC Mode D'emploi

Connection to power supply

1) Ground lead connects with green/yellow earth line through terminal block
2) Output red wire connects with red DC motor power line
3) Output pink wire connects with pink DC motor power line
4) Output grey wire connects with grey DC motor power line
5) Output blue wire connects with blue DC motor power line
6) Output white wire connects with white fan lighting null line
7) Powerline connects with input black line through terminal block
8) Null Line connects with input white line through terminal block
9) Now you can put the receiver into the free space in the middle of the hanger bracket directly

Mounting the fan

1)
Put the hanger ball into hanger bracket, turn the down rod, let the concave groove of hanger ball into the lugs of
hanger ball plate. Concave groove of hanger ball must be put into the bracket lugs.
2)
Turn the canopy until fixing screws lock into position and then fasten the screws
chain__
__ __________
____________ ________
__ ________
.