Pairing The Remote Control - KLASS Fan Riaica DC Mode D'emploi

Remote control
Your fan has 6 speeds, it has an eight-hour turn-off timer.
Timer indicator on, 1 led = 1 hour, 2 led = 2 hours, 3 led = 4 hours, 4 led = 8 hours.

Pairing the remote control

Important: By default the included remote control is paired with your receiver. When the remote control does not
respond, please follow this pairing procedure step by step.
1) Put the battery in the remote control.
2) Make sure the fan is powered by electricity.
3) During the first 30 seconds, the pairing channel remains open, within this interval press the ON / OFF button on your remote
control for 5 seconds.
4) A beep emitted by the remote control and the fan indicates that the two elements are paired.
Note 1: A beep sound will be heard when a function is transmitted and received by the receiver.
Note 2: The engine does not react instantly, be patient.
Note 3: The Memory function is active, it records the last status before disconnection.
Note 4: Remove the battery from the remote control if you are not using your fan.
Note 5: To change the direction of rotation, you must turn the fan off.
Note 6: Only one remote control can be paired with this fan.
Note 7: When you turn off the switch and turn it back on, the light turns on automatically.
_ _ __ ________
_ _ __________