LEAD dynamic A65 Manuel D'utilisation page 4

ENGLISH
Thank you for choosing a product from LEAD energy
AG. If you would like to get in touch with our service
team, please contact them via our website or by
e-mail.
Intended use
You can screw the A65 into luminaires with an E27
socket in order to create atmospheric and control-
lable lighting. The WIFI GATEWAY allows you to con-
trol your A65 using the LEAD DYNAMIC app.
1.1
Drill hole diagram for wall installation
of WIFI GATEWAY
41 mm
1.2
Mounting light bulbs
Screw the bulbs into any luminaire with an E27
socket. Follow the luminaire's instructions for use.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
ø 4 mm
Subject to errors and amendments
?
Note
Please observe the warnings prior to installation.
2
Installation
O
learn
I
Switch
ON
A B
A
B
To start the 'LEARN' function, switch your luminaire
on using the light switch and follow the installation
instructions in the operating manual for your remote
control / wall controller or the instructions in the app.
The 'learning' process must be completed within 15
seconds. If you want to control this luminaire using
the LEAD DYNAMIC APP, you have 90 seconds for the
'learning' process.
Information / Technical support: www.lead-energy.com
service@lead-energy.com
www.lead-energy.com
}
15 sec.
Smartphone
<90 sec.
Remote Control
Wall Controller