For Your Safety; Declaration Of Conformity - Würth DMH 10 Traduction Des Instructions De Service D'origine

GB
Please read and comply with these
instructions prior to the initial
operation of your appliance.
Retain these instruction manual for
future reference or for subsequent
possessors.
Technical data
Prod. no.
Tool holder, hexagonal
Piston Ø / stroke
Impact rate
Dimensions (L x W x H)
Pressure air connection
Average air consumption
Min. hose diameter
Operating pressure
Weight
Information on noise and
vibration
The values were determined in accordance with
EN ISO 15744.
Typical measured noise levels (A):
Sound pressure level 96.3 dB (A);
■
Sound power level 107.3 dB(A).
■
Wear hearing protection!
The level of vibration complies with
EN 28662-2+A2:
a = 4.84 m/s
2
■
h
Uncertainty K = 2.42 m/s
■
4

For your safety

0703 712 1
10.2 mm
19/67 mm
2,900 min
-1
218 x 56 x 176 mm
¼''
76.4 l/min
8 mm
6.3 bar (90 psi)
1.73 kg
2
WARNING - Prior to the first
start-up, it is definitely necessary to
read the Safety instructions!
In case you do not adhere to this instruction
manual and the safety instructions, this may result
in damage on the device and cause dangerous
situations for the operator and other people.
In case of transport damage inform vendor
immediately.

Declaration of Conformity

We herewith declare that this product conforms with
the following standards and directives:
Standards
• EN ISO 12100-1+A1
• EN ISO 12100-2+A1
• EN ISO 14121-1, EN 792-4+A1
• EN ISO 15744, EN 28662-2+A2
in accordance with the regulations stipulated in the
directives:
EC directive
• 2006/42/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 01.02.2012
General Manager