Accessories; Functional Description - Haussmann PNT122-B Manuel De L'utilisateur

ADDITIONAL SAFETY INSTRUCTIONS FOR AIR-POWERED DUAL-ACTION SANDER
15. Maintain correct balance and footing. Make sure that the floor is not slippery, and
wear non-slip shoes.
16. Keep children and non-essential persons away from the work area.
17. Do not use the air-powered dual-action sander for a task that it is not designed to
perform.
18. Do not use air-powered dual-action sander if it is damaged or if there is reason to
believe that it is defective.
19. Do not use air-powered dual-action sander without having been instructed in its
use by a qualified person.
20. Do not carry the air-powered dual-action sander by the air hose.
21. Do not direct air from the air hose at the operator or at others.
22. When the air-powered dual-action sander is not in being used, disconnect it from
the air supply, and store it in a safe, dry, childproof location.
SPECIFICATIONS
This HAUSSMANN XPERT air-powered, dual-action sander features a light aluminum
body. Exhaust is discharged to the front, and grips are ergonomically designed. It
produces a random sanding action for smooth pattern-free finish. It is designed for
sanding wood, metal, fibreglass, and auto body filler.
Sanding Pad: 6" (150 mm)

No-load Speed: 10,000 RPM

Average Air Consumption: 3.3 CFM (93.4 L/min)

Operating Pressure: 90 PSI

Air Inlet Size: 1/4" (6 mm) NPT

Air Hose: 3/8" (10 mm) ID


ACCESSORIES

Tool lubricating oil

1/4" (6 mm) NPT male connector

6" (150 mm) sanding backer pad


FUNCTIONAL DESCRIPTION

Figure 1 names the major components of the HAUSSMANN XPERT
air-powered dual-action sander:
A. Sanding Pad
B. Motor Head
C. Speed Regulator
D. Trigger
E. Rubber Handle
F. Air Inlet Port for 1/4" (6 mm) NPT connector
16
PNT122-B
1
1
1
B
C
A
D
E F
Fig.1