Care And Maintenance - Wagan Tech 7403 Guide D'utilisation

4.0A Intelligent Battery Charger by Wagan Tech
5. When disconnecting charger, disconnect AC cord first, remove clamp from
vehicle chassis, and then remove clamp from battery terminal.
6. Do not charge the battery while the engine is operating.

CARE AND MAINTENANCE

With only minimal maintenance, the 4.0A Intelligent Battery Charger will deliver
years of dependable service. Follow these simple steps to maintain the charger
in optimum condition: After each use, clean the battery charger clamps - be sure
to remove any battery fluid that will cause corrosion of the copper clamps. Clean
the outside case of the charger with a soft cloth and, if necessary, mild soap
solution. Keep the charger cords loosely coiled during storage to prevent damage
to the cords. Do not use the charger if cords or clamps have been damaged
in any way. If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or qualified person in order to avoid a hazard.
9
www.wagan.com
®