Connecting The Transmitter - Amplicomms HS 1300 Mode D'emploi

G
ETTING STARTED
Getting started
Box contents
• Headphone receiver
• Wireless transmitter with built-In AAA size battery charger
• Rechargeable NiMH AAA size batteries for headphone (4 pieces)
• AC/DC adaptor
• Optical TOSLINK digital audio cable
• Stereo 3.5 mm plug to RCA analogue audio cable
• RCA adapter to 3.5 mm stereo jack for analogue audio cable
• User guide
Important: please make sure you've read the safety information on page
26 before you set up your device.

Connecting the transmitter

1 Connect the power adapter to the DC IN input socket located on the
transmitter rear panel.
2 Connect the power adapter provided to an electrical outlet.
3 Connect the transmitter to your audio source.
RCA adapter cable and audio cable are provided for various type of con-
nection to your audio source (e.g. TV set, Hi-Fi system, MP3 or iPod).
4 Optionally you can connect the audio source via an optical cable.
5 Select the desired input with the "Audio In" switch.
6 Select the switch to MONO or STEREO at the back of transmitter.
7 Put the power switch at the back of the transmitter to ON, the red LED
will be on.
8 The green signal indicator LED will blink as soon as you switch on the
transmitter. The green LED indicator will glow constantly when it recei-
ves audio signal from the sound source.
18
Helpline UK 0844 800 6503
(See page 29 for costs and hours of operation)