Scope Of Delivery - Mesto FERROX 3565 Mode D'emploi

Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Contact between spraying device materials and hydrogen peroxide or other agents
that give off oxygen may result in increased pressure similar in nature to an
explosion. Never place such agents in the device.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature (→Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).

Scope of delivery

Tank [1], with pump [2] and spare parts pouch [3], spray line [4], instructions for use [5],
carrying strap [6], spray lance [7], pump holder [8] (Figures 1a and 1b)
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of these
Instructions for Use.
Technical data
Device family
Type
Max. filling amount
Total contents
Max. spraying pressure
Max. operating
temperature
Weight when empty
Material of tank
Where device is carried
Technical residual
quantity
Max. volume flow
Recoil force
Table 1
FERROX
3565
5 l
9 l
4,7 kg
Steel with polyester coating
Shoulder
13
3585 3595
10 l
13 l
6 bar (87 psi)
40 °C (104 °F)
5,2 kg 4,2 kg
Back Shoulder
0,03 l
4,5 l/min
< 5 N
INOX
3615
5 l 10 l
9 l 13 l
4,7 kg
Stainless steel
Back