Inserting Batteries - Bebeconfort NT3 Notice D'utilisation

EN NO TOUCH MEDICAL THERMOMETER
Bébé Confort's no touch medical thermometer uses the latest technology to pick up infrared rays emitted
by a body so that its temperature can be measured. The benefit of this technology is that you can take a
temperature from a distance, without direct contact, and obtain an instant result. It means you can follow
the progress of a baby or child's temperature without disturbing them - even when they're asleep.
However the fact that this thermometer is easy to use, quick and also allows you to take the temperature
of surrounding objects does not mean that you should forget that it is primarily a medical measuring device.
When using it, please ensure you follow the general recommendations and specific precautions detailed
in these instructions.
Please familiarise yourself with these instructions before using the device and keep them in a safe place.
Lastly we would like to remind you that if you are in any doubt about the health of a member of your family
or if someone has a fever, you should consult a doctor quickly.
1 - DESCRIPTION OF THE THERMOMETER AND ITS SCREEN
1/ Liquid crystal display
2/ Start/measure button
3/ Memory button
4/ Operating mode selection button
5/ Fever signal
6/ Sensor
7/ Radar
8/ Battery housing lid
9/ Temperatures measured in degrees
10/ Measurement in progress
11/ Smiling face indicating a temperature below 38°C
12/ Sad face indicating a temperature equal to or above 38°C
13/ Unit of measurement
14/ Forehead mode
15/ Household mode
16/ Low battery signal
17/ Memory and number of recording

2 - INSERTING BATTERIES

1. Gently press the lid of the battery housing outwards to remove it (8).
2. Insert two AAA batteries, taking care to position them correctly and observing the polarity indicated on
the base of the housing.
3. Replace the lid by sliding it into the side slots until it clicks into place.
Batteries and electronic instruments must be disposed of in accordance with local regulations, separate
from household rubbish.
3 - OPERATING MODE SELECTION BUTTON
This thermometer can operate in two modes:
• In medical thermometer mode, the device measures the forehead temperature from a distance. The
screen shows a little head and shoulders figure top centre
• In household thermometer mode, the device measures the temperature of different elements or objects
in the house, again without direct contact. To go to household thermometer mode, switch the thermometer
on by pressing on the MEASURE
When two zeros appear under the head and shoulders, briefly press the selection button which makes
a small cube appear in the top right confirming the mode selected.
Please note: whichever mode is used and after switching it off, the thermometer automatically
reverts to medical thermometer mode.
24
.
button.
4 -
A/
• B
dev
dis
ind
• P
mo
(pre
dis
the
•
me
but
sec
B/
• Te
at t
• T
bee
All
mo
C/
The
D/
To
• D
or o
• E
• A
• P
of a
give
• F
use
lag
reg
5 -
A/
• S
onc
• B
tha
righ
• P
the
• T
bac
B/
• T
sou
• F
sen