Kimpex CLICK N GO 2 Instructions D'assemblage page 11

"CLICK N GO 2" FRAME ADAPTOR
Polaris Sportsman 850-1000 XP et Touring
4) Remove the skid plate from the vehicle. Drill the marked holes using the drilling tool provided for this purpose
(Kimpex product No. 373920). There are also zones to be cut to allow passage of the fixation plate
skid plate afterwards (see Figures 3 and 4).
Fig. 3
5) Pass the fixation plate
(2) U-bolts in the holes previously drilled (see Figures 5 and 5.1).
07
Fig. 5
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
A-7815010-15  Printed in Canada
ASSEMBLY INSTRUCTIONS
in the frame and hold it in place using two (2) M8-1.25 x 60 mm carriage bolts
05
KIMPEX NO.
Fig. 4
Holes to be used
Fig. 5.1
-15
373951
. Reinstall the
05
. Pass two
01
3