Eneo VDA-4A Mode D'emploi page 13

4.3 Output signal range (Gain Adjustment)
VDA-4A
TP301
TP302
VDA-4A Common setting for all 4 outputs
TP301: Pre-equalization of high frequencies for equalizing the frequency-
dependent signal losses caused by the cable lengths.
TP302: Linear signal gain adjustment
Note:
TP101 is used for the operating point adjustment, is securely adjusted
in the default settings and must not be changed.
VDA-8CA Linear gain adjustment
TP201: VIDEO OUT 1
TP211: VIDEO OUT 2
TP221: VIDEO OUT 3
TP231: VIDEO OUT 4
TP241: VIDEO OUT 5
TP251: VIDEO OUT 6
TP261: VIDEO OUT 7
TP271: VIDEO OUT 8
VDA-8CA
TP231
TP211
TP201 TP221
13
TP271
TP251
TP241 TP261