Setting Of The Alarm Time (Fm Version); Setting Of The Alarm Time (Dab Version); Deactivate The Alarm; Snooze - THOMSON CR80 Mode D'emploi

Setting of the alarm time (FM version)

The system must be in standby mode in order to set the alarm.
1) Press and hold the "VOL - / ALARM 1" button for 2 seconds to entry alarm set mode.
2) The hour digits start flashing. Use the "SCAN +" & "SCAN -" buttons to set the hour accordingly.
3) Press the "VOL - / ALARM 1" button to confirm the hour.
4) Repeat step 2 and 3 to set the minute.
5) Press the "SCAN +" or "SCAN -" button to select below 1, or 2 for wake-up function.
1 - BUZZ, 2 - SCAN(RADIO)
6) Press the "VOL - / ALARM 1" button to confirm.
7) Use the "SCAN +" & "SCAN -" buttons to set the Alarm volume.
8) Press the "VOL - / ALARM 1" button to confirm. The display will show "AL1".
To set the second alarm time, repeat each of the above steps with the "VOL. + / ALARM 2" button.

Setting of the alarm time (DAB version)

The system must be in standby mode in order to set the clock.
1) Activate alarm setting mode: Press and hold "VOLUME- / ALARM 1" button for 3 seconds.
2) The display will show "Alarm 1 Setup". Press ""VOLUME- / ALARM 1" button to confirm.
3) The hours of the currently set alarm time will start to flash.
4) Press "SCAN+" or "SCAN-" buttons to set the hour. Press "VOLUME- / ALARM 1" button to confirm.
The minute indicator starts blinking.
5) Press "SCAN+" or "SCAN-" buttons to set the minutes. Press "VOLUME- / ALARM 1" button to
confirm.
6) Press "SCAN+" or "SCAN-" buttons to set the Duration. Press "VOLUME- / ALARM 1" button to
confirm.
7) You can use the "SCAN+" or "SCAN-" buttons to choose one of the Alarm mode: BUZZER / DAB
/ FM.
Press "VOLUME- / ALARM 1" button to confirm.
8) You can use "SCAN+" or "SCAN-" buttons to choose the channel and press "VOLUME- / ALARM
1" button to confirm. (Only available in DAB & FM Alarm mode.) Radio stations must be stored
before to allow you to select channel.
9) You can use the "SCAN+" or "SCAN-" buttons to choose one of the Alarm setting:
Daily / Weekdays / Weekends / Once
10) Press "VOLUME- / ALARM 1" button to confirm.
11) Press "SCAN+" or "SCAN-" buttons to set the Alarm volume. Press "VOLUME- / ALARM 1" button
to confirm.
To set the second alarm time, repeat each of the above steps with the "VOLUME+ / ALARM 2" button.

Deactivate the alarm

Press "VOLUME- / ALARM 1" or "VOLUME+ / ALARM 2" button to turn off the alarm.

Snooze

Press "SNOOZE / DIMMER" button to suspend alarm sound for a few minutes. (FM version)
Press "MENU / SNOOZE / DIMMER" button to suspend alarm sound for a few minutes. (DAB version)
The alarm will start again after approx. 9 minutes.
- EN 7 -