Kygo Life A11/800 NOIR Manuel D'utilisation page 17

E N G L I S H
Pairing
Pairing phone or devices:
•
Make sure the headphones are powered OFF.
•
Press and hold the multifunction button for 5 seconds.
•
The red and blue LEDs will blink, and you will hear a smart voice saying that the
headphones are in pairing mode.
•
Activate the Bluetooth function on your phone or device and select
Kygo A11/800 to connect.
Reconnect the last paired device:
Press the multifunction button for 2 seconds. The headphones will enter repair mode and
search for the last connected device. If it isn't connected within 10 seconds, the
headphones will enter regular pairing mode.
16