Getting Started; Product Description - Tektronix P6701B Mode D'emploi

Getting Started

This section contains a description of the P6701B, P6703B, and
P6723 O/E Converters and information about features, options,
accessories, and proper installation.

Product Description

The P6701B, P6703B, and P6723 products (Figure 1) are optical-to-
electrical (O/E) converters that convert optical communication and
optical video signals into electrical signals for display on an
oscilloscope.
The P6701B analog converter accepts short wavelength signals
(500 to 950 nm) present in multimode fibers. Conversion gain of
1V/mW is calibrated at 780 nm.
The P6703B analog converter accepts longer wavelength signals
(1100 to 1600 nm) present in singlemode or multimode fibers.
Conversion gain of 1V/mW is calibrated at 1310 nm.
The P6723 digital converter views the digital content of optical
signals (1100 to 1600 nm) with data rates up to 650 Mb/s. The
P6723 converts the digital content of the optical signal to an
electrical signal with a constant voltage of approximately 1 V
Figure 1: P6701B, P6703B, and P6723 O/E Converters
P6701B, P6703B & P6723 Instructions
.
p-p
5