Specific Safety Rules - Ryobi P737D Manuel D'utilisation

 Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the inflator's operation. If damaged, have the
inflator serviced before using. Many accidents are
caused by poorly maintained tools.
 Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one inflator may create a risk of injury when
used on another inflator.
 Keep the inflator and its handle dry, clean and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your
inflator. Following this rule will reduce the risk of loss of
control and deterioration of the enclosure plastic.
 Never point any inflator toward yourself or others.
 Know your inflator. Read operator's manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this tool. Following
this rule will reduce the risk of electric shock, fire, or
serious injury.
 Risk of bursting. Do not operate inflator to result in
output pressure greater than marked maximum pressure
of item to be inflated. Do not use at pressure greater than
150 PSI.
 To reduce the risk of electric shock, do not expose to
rain. Store indoors.
 Inspect unit for cracks, pin holes, or other imperfections
that could cause inflator to become unsafe.Never cut
or drill holes in the inflator.
 Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance or
footing and may become damaged.
GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

3 — English
 Do not exceed the pressure rating of any component
in the system.
 Protect material lines and air lines from damage or
puncture. Keep hose and power cord away from sharp
objects, chemical spills, oil, solvents, and wet floors.
SERVICE
 Inflator service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
 When servicing an inflator, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
 Use the inflator only for its intended use. Do not alter
or modify the unit from the original design or function.
 Always be aware that misuse and improper handling
of this inflator can cause injury to yourself and others.
 Never leave an inflator unattended with the air hose
attached to the item being inflated.
 Do not continue to use a inflator or hose that leaks
air or does not function properly.
 Always disconnect the air supply and power supply
before making adjustments, servicing an inflator, or
when an inflator is not in use.
 Do not attempt to pull or carry the inflator by the
hoses.
 Always follow all safety rules recommended by the
manufacturer of your inflator, in addition to all safety
rules for the inflator. Following this rule will reduce the
risk of serious personal injury.