Inno Essentials Silk'n Lipo H5001 Mode D'emploi page 16

Control
Battery / Error light
(left)
EN
Operating light
(middle)
Indicator light
(right)
4.3 Energy levels
Silk'n Lipo has multiple levels of Electrical Muscle Stimulation (EMS). This
gives you excellent control of the intensity of muscle stimulation you wish
to use for each part of the body you treat. What's more, you can change
levels as often as you like during a treatment.
To increase the EMS level: Short press the + button as many
U
times as you need to set to the EMS level that is comfortable for
you. You will see that the operating light blinks more quickly as
you increase the EMS level.
To reduce the EMS level: Short press the - button as many times
U
as you need (see section "4.2 Controls and settings").
To set the EMS level back to zero: Long press the - button.
U
You can only change EMS levels when the treatment unit is in good
a
contact with your skin. When there is no contact with the skin, the EMS
drops to zero.
Action
y
Orange
light blinks
continuously
y
Constant orange
y
Green light blinks
continuously
y
y
Constant green
y
y
---
14
Function
Battery low.
Device error.
The device is on, and has good
contact with the skin.
Blinks faster as the EMS level
increases.
There is no contact with the skin
but the device is ready to use.
The device will then shut down
automatically after a minute or so
if there is no contact with the skin.
Not in use.