Creative OUTLIER EF0690 Démarrage Rapide page 7

Table des Matières

Publicité

Button
3.
Press to change to the next or previous
Next, Forward
track. Press and hold to scroll forward or
/ Previous,
backward a track (device dependent).
Backward
/
4.
Slide switch to enable playback from
Mode Selector
either
(
(microSD Audio) or tracks from a USB
connected computer (USB Audio).
Light Indicator
5.
Right earcup
Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
indicator
Blue and blinks moderately:
automatically searching and attempts to
connect to the last paired device.
Blue and blinks slowly: connected to a
paired device.
Blue and flashes once: successfully
cleared all paired devices.
Green: in microSD Audio or USB Audio
mode.
Green and flashes twice: selected
microSD Audio / Play All mode.
Green and flashes randomly: selected
microSD Audio / Shuffle mode.
Function
Bluetooth
a
wireless
), stored tracks in microSD media
Function
device
Connector / Port
6.
microSD slot
7.
Micro-USB
charging
connector
8.
Audio Input
connector
(3.5mm / ⅛")
Green and blinks thrice: low battery
level in microSD Audio or USB Audio
mode, charge the headset soonest.
Red and Blue blink alternately: low
battery level in Bluetooth mode, charge
the headset soonest.
Red and flashes once: powering off
the headset.
Red: charging headset. This goes off
when headset is fully charged.
Note: the light indicator may appear as a
combination of above colors and behavior
depending on functionality.
Function
Insert a TF or microSD memory card
for stored music playback. Press once
to secure the card in the slot and press
again to eject the card.
Use the supplied USB cable for charging
the headset via a laptop or computer.
Also for USB Audio connection.
Use a stereo audio cable (available
separately) for a wired connection to a
non-wireless device or when battery power
runs out. In this mode, Bluetooth, microSD
Audio and USB Audio connections will be
disabled.

Publicité

Table des Matières
loading

Table des Matières