Technical Data; Installing The Appliance - Royal Catering RCKM-20 Manuel D'utilisation

TECHNICAL DATA

Product name
Model
Rated voltage / Frequency
Rated power
Tank's capacity (up to the maximum level)
Tank's total capacity
Weight
SCOPE OF APPLICATION
The coffee maker is only designed for the preparation of coffee using cold water.
Do not use the coffee maker for:
- cook soups or other drinks than coffee;
- warm up liquids containing sugar, sweeteners, acids, bases or alcohol;
- warm or warm up flammable, noxious, particularly volatile, or any other toxic substances.
The user is liable for any damage resulting from non-intended use of the device!
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages in as much detail
as possible. Do not turn the package upside down! When transporting the package, please ensure that it is
kept horizontal and stable.
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition.

INSTALLING THE APPLIANCE

Appliance location
The temperature of environment must not be higher than 45 °C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is used. The distance between the back
of the device and the wall should be at least 20 cm, minimum distance between the sides of the device and
the walls should be at least 10 cm on each side and 35 cm between the top of the device and the ceiling.
Keep the device away from hot surfaces. Operate the device on flat, stable, clean, refractory and dry surfaces
out of the reach of children and people with mental disabilities. Install the device making sure that constant
access to the main plug is ensured. The power cord connected to the appliance must be properly grounded
and correspond to the technical details. Before first use, remove all elements and clean them along with the
entire device.
10
Coffee maker
RCKM-20
230 V~ / 50 Hz
1500 W
16 l
21 l
5,5 kg
Rev. 03.11.2016
PRINCIPLE OF OPERATION
2
1
1
10
9
4
5
6
8
7
1. coffee maker handle
2. lid handle
3. tank
4. ON/OFF switch
5. power cable
6. control lights
• "HEATING" (coffee is brewing)
• "WARM" (coffee is ready)
7. coffee maker base and the reset button
8. drip tray
9. dispensing valve
10. water level indicator
11. filter basket
12. basket support tube
Mount the basket support tube and the filter basket inside the tank then pour water into the tank. Do not
fill the coffee maker above the "100" level on the water indicator. Place a filter into the basket and fill with
coffee. The amount of coffee should reflect the volume of water in the tank and user preferences. Place the
lid on top of the tank and twist clockwise until firmly closed. Then plug the power cable into a socket and
switch the percolator on using the ON/OFF switch. The red "HEATING" light will be on when the coffee is
brewing. Once the coffee is brewed the red light will go off and the green "WARM" light will come on. The
coffee percolator will automatically maintain a high water temperature, to make sure the coffee is always
hot. To pour coffee, place an appropriate container on the drip tray (glass, mug, cup, etc.) and push the valve
Rev. 03.11.2016
11
3
12
11