Measurement Display; Note On Guest Mode - boso medicus family 4 Mode D'emploi

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) and time and date
are displayed. see illustration 7).
1
Alternating time and date are displayed.
Illustration 7
58
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (60 measurements),
the oldest measurement is deleted and
the current one stored.

Note on guest mode:

If a measurement value is not be kept,
Systole
press „M" while the measured values are
mmHg
still on display.
Invalid measurements with an "Err" mess-
Diastole
age (see page 64) are not stored.
mmHg
Pulse/min.