Quick Guide - boso medicus family 4 Mode D'emploi

Quick guide

➡ Insert batteries, ensure correct position-
ing (P. 47)
➡ Connect cuff to monitor (P. 52)
➡ Attach cuff (P. 53)
➡ Start (and stop) a measurement by
pressing the start button (P. 56)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 58)
➡ Retrieving values from memory (P. 60):
Press the M-button with the monitor
switched off. The first value displayed
is the average value of all stored mea-
42
surements together with the WHO
classification.
The total number of stored measure-
ments is displayed at the same time,
e.g. "A30". Repeated pressing of „M"
the individual measurement values are
then displayed in sequence.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!