Alcad GRF-200 Mode D'emploi page 17

Cut the required perforated openings of the
terminal cover. Fix it to the power supply unit
using the fixing screws.
RECOMMENDATIONS
Choose an area of smooth, uniform and hard wall when deciding where to place the monitor. If the bracket is fixed to a standard electrical
box, make sure that this is uniformly aligned. This way you will get an optimal fixing of the monitor.
Put it far from direct light sources, avoiding nonwhished effects in picture display (reflections,...). Same way avoid hard sources of heat,
humidity, steam, that could reduce the operational life of the equipment.
Fix the connection bracket to the wall with plugs
and screws supplied. 4 holes placed on the corners
are recommended. Put in a way that the upper
part is at a height of 1.6 metres.
D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S
CONNECTION BRACKET
Bracket can also be fixed to a standard 60 mm
electrical box.