THOMSON CR50DAB Mode D'emploi page 18

Tuning in to an FM station
Press and hold the TUNING+/TUNING- button on the top of your radio to scan up the frequency band.
Press the TUNING+ or TUNING- button to fine tune each frequency in 0.05 MHz steps.
Note: If reception is still poor, adjust the position of the antenna or try moving the radio to another location.
Preset stations
Your radio can store up to 20 FM stations in its preset memories for instant access to your favourite
stations.
Note: When you store preset FM radio stations, these do not overwrite your preset DAB stations.
1) Tune your radio to the station that you wish to preset.
2) Press and hold the PRESET button on the top of your radio.
3) Then press the TUNING+/TUNING- button to scroll to the Preset location where you would like to
store the radio station (1-20).
4) Press the SELECT button to select and the display will confirm 'STORED'.
Note: If there is already an existing preset FM station, it will be overwritten when you store the new
station.
Tune to a preset FM station
In FM mode:
1) Press the PRESET button.
2) Use the TUNING+/TUNING- button to scroll to the Preset location and station that you would like to
listen to (1-20). Press and release the SELECT button to select. The radio will tune to that station
and begin to play.
Note: If no FM station has been stored under the preset button, 'EMPTY' will be displayed and the radio
will revert to the previously selected radio station.
FM display information
When listening to an FM station you can change the information that will appear on the display.
• Radiotext (RT)
This is scrolling text information supplied by the broadcaster. Information could be the name of an
artist or music title, the DJ's name, the contact details for the radio station etc.
• Program Type (PTY) such as 'Rock', 'Pop', Talk' or 'News'
• Station name or frequency such as BBC R4 or 93.30MHz
Audio mode---Stereo or Mono
Time and Date----Supplied by the broadcaster
1) Repeatedly press and release the Menu/Info button on the top of the radio to cycle through the
different information options.
Set the time and date
The first time you listen to the DAB radio, the time and date of your product will be synchronised
automatically to that broadcast by the DAB service in 24 hour clock mode; which is in line with daylight
saving, but you can set the time and date manually.
In DAB mode:
1) Press and hold the Menu/Info button until '<SCAN>' is displayed.
2) Use the TUNING+/TUNING- button to scroll to '<System>'. Press the SELECT button to select.
3) Use the TUNING+/TUNING- button to scroll to '<Time>'. Press the SELECT button to select. '<Set
Time>' is displayed. Press the SELECT button to select.
4) The hour digits will flash. Use the TUNING+/TUNING- button to scroll to the correct hour. Press
the SELECT button to select.
5) The minutes will now flash. Use the TUNING+/TUNING- button to scroll to the correct minutes.
Press the SELECT button to select.
6) The day will flash. Use the TUNING+/TUNING- button to adjust and press the SELECT button to
set the day, month and year, using the same method as you did to set the time.
When you confirm the correct date, 'SAVE' is displayed and the display returns to '<SET TIME>'.
You can now use the TUNING+/TUNING- button to scroll and the same method as you did to set the
time and date to change the settings for:
- EN 6 -