Important Notice - Varan NEOC-01 Manuel D'utilisation

IMPORTANT NOTICE

Never to use the device prior to understanding the information in manual. The device can only be operated according to
the prescribed procedures in the manual.
 The device can be operated only by trained qualified person.
 Never smoking nearby the device.
 3.60-100 C is suitable for the temperature of waste engine oil pumped by the device. Density of engine oil under the
above temperature is about 1.3 times more than waters; therefore the flow velocity of oil is slower than waters.
Cases such as failure pumping or slow flow are possible in case of the temperature lower than specified value
mentioned above.
AMBIENT CONDITIONS:

Operating temperature: 10 +60°C Install away from heat sources.
FEEDING CONDITIONS:

The unit must be supplied with clean air.

Check that effective filtering systems have been installed on the air line.

The supply pressure must never exceed 4 bar.
CONDITIONS OF EMPLOYMENT:

Only use original spare parts.

Always replace damaged accessories.

Do not use corrosive or explosive liquids.

Use the appliance only for harvesting used oils.

During the oil change the tank must always be supplied with a constant pressure.
TRANSPORT AND PACKING:
The packaging of the machines is carried out by our company in accordance with the agreements made with the
customers, on a case-by-case basis and according to the country of destination or the means of transport used. After
installation, the packaging may be reused or disposed of in accordance with the provisions in force in the purchaser's
country.
TRANSPORT :
The machines must be transported packed close to the installation site. For all lifting and moving operations of machines
or separate parts, transported independently, call upon specialized personnel.
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Oil Collecting
NEOC-01
User Manual
T: 00352/26908036 – F: 00352/26908040
NEOC-01