Voice Guidance - Trevi VS 5080 BT Manuel Utilisateur

moment. In addition, if the Bluetooth connection of the device disabled and do not connect
again in 180 seconds, the VS 5080 BT will power off automatically.
POWER ON FROM STAND-BY MODE
In the standby model (soft off), if you want to restart the device, you just need to shake
anything nearby (like closing the car door) that can awake the VS 5080 BT back to active mode.
PLAY MUSIC OR GPS
You can play music or hear GPS through the VS 5080 BT Music or GPS played on your
connected mobile phone will automatically transfer to the VS 5080 BT.

VOICE GUIDANCE

Voice guidance guides you through using the VS 5080 BT:
What you hear
"Power on, Pairing"
"Connected"
"Disconnected"
"Last number redial"
"Low battery"
"Power off"
MOBILE PHONE VOICE COMMANDS (E.G. SIRI)
To activate your mobile phone's voice commands (e.g. Siri), press the Voice Command
button on the VS 5080 BT. For a full list of voice commands refer to your mobile phone's
user manual. (Phone dependent).
CHOOSE YOUR LANGUAGE
1. Slide ON/OFF button to turn on the VS 5080 BT and enter the Bluetooth pairing
mode.
2. Long press the Voice Commander button simultaneously for 5 seconds to switch the
language. Your will hear a voice prompt after switching sucessfully.
The order of switching langauge is Italian, English, French, followed by recycling.
NOTE:
- Switching language only can operate under the pairing mode. The VS 5080 BT has
not connected with any Bluetooth devices.
What it means
The VS 5080 BT is powered on and in pairing
mode. Follow the instructions to pair your mobile
phone with the VS 5080
VS 5080 BT is connected to a phone/ device
A connected phone/ device is turned off, out of
range, or has Bluetooth disabled while in range
Redial the last number
The VS 5080 BT battery level is low, please
charge your unit in time.
The system of VS 5080 BT
BT.
is powered off