Trevi VS 5080 BT Manuel Utilisateur page 15

FIRST TIME PAIRING
The first time the VS 5080 BT is turned on, voice guidance will guide you through pairing
with your mobile phone.
1. Turn on the device.
2. The answer key flashes red and blue alternatively, you will then hear a voice prompt
"Power on, Pairing". Bluetooth will need to be activated on your mobile phone. If
asked for a passkey or PIN during pairing, please enter 0000.
NOTE: After the VS 5080 BT and a mobile phone have been paired, they will automatically
connect whenever the VS 5080 BT is switched on and the mobile phone has Bluetooth
activated within range.
PAIRING WITH ANOTHER MOBILE PHONE
1. Turn on the device.
2. Long press the Volume + and Volume - button simultaneously for 2.5 seconds to
disconnect the Bluetooth link with the first mobile phone and waiting for pairing the
second Bluetooth enabled mobile phone.
3. Activate Bluetooth on your second mobile phone and select VS 5080 BT. If asked for
a passkey or PIN during pairing, please enter 0000.
4. Select the VS 5080 BT from the list of My Devices or Paired Devices on the first
mobile to connect the VS 5080 BT. again.
VS 5080 BT