Homelite UT44173 Manuel D'utilisation page 13

CLEANING THE SHRUBBER
 Stop the motor and allow blades to stop moving.
 Slide bottom cover latch to the right
and disable motor.
 Slide the scabbard over the blades.
 Clean dirt and debris from the body of the shrubber, using
a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
 Slide bottom cover latch left
motor.
BATTERIES
This product is equipped with a nickel-cadmium rechargeable
battery. Length of service from each charging will depend on
the type of work you are doing.
The battery in this product has been designed to provide
maximum trouble-free life. However, like all batteries, it will
eventually wear out.
To obtain the longest possible battery life, we suggest
removing the product from the charger once it is fully charged
and ready for use.
NOTE: Batteries are not intended to be replaced.
MAINTENANCE
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
See Figure 7.
to unlock cover
 Stop the motor.
 Remove the screws securing motor housing cover, then
 Lift batteries from motor housing enough to expose leads
 Using wire cutters with rubber coated or insulated handles,
To preserve natural resources, please recycle or dispose of
batteries properly.
to lock and reconnect
STORING THE SHRUBBER
See Figure 8.
 Clean all foreign material from the shrubber. Store indoors
 Always place the scabbard on the cutting blades before
 Store the product where the temperature is below 80°F.
 Store the product in a "discharged" condition.
 Remove the blades and store them in a separate location
Page 11 — English
remove cover.
and battery terminals.
clip the battery leads and remove the battery for disposal.
This product contains nickel-cadmium
batteries. Local, state or federal laws may
prohibit disposal of batteries in ordinary
trash.
Consult your local waste authority for
information regarding available recycling
and/or disposal options.
WARNING:
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy
or disassemble battery pack or remove any of its
components. Nickel-cadmium batteries must be recycled
or disposed of properly. Also, never touch both terminals
with metal objects and/or body parts as short circuit may
result. Keep away from children. Failure to comply with
these warnings could result in fire and/or serious injury.
in a dry, locked up place—out of the reach of children.
Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
transporting or storing the unit.
out of the reach of children to avoid unauthorized use of
the shrubber.